This page is to assist you with some iR5000 issues
1. Some problems sent to us by Scot Fraser -
printing without a Canon driver and All PCL print jobs print out in 11
by 17 booklet mode.
Thanks Scot
Problem
|
Solution
|
Print
files sent to the Canon iR5000 that have not been generated by a Canon
Windows or Mac print driver (ie: from Unix, DOS or other system) do not
print. They do however show up in the copier's print log.
|
The
iR5000 printer setup has the printing contexts of PCL and PS turned off
by default for Auto Selection. Turn them on as follows:
Additional
Functions button; Printer Settings; Settings; Auto Select: turn PCL ON,
PS ON.
|
All
PCL print jobs print out in 11 by 17 booklet mode.
|
Booklet
must have been turned ON by mistake by someone in the Additional
Functions; Printer Settings; Settings. Turn it off.
Oddly
enough, Booklet overrides the Canon PCL printer driver to force 11x17
booklets whereas other settings do not affect the PCL driver.
The
Canon PS driver does not have this problem.
|
2. I want to get a hard copy of the Job Logs
Currently there is no export Job Log feature.
You can however select the entire log on your screen and paste them
into Excel for a hard copy.
3. How can I see the actual numbers of pages
printed with a Job log?
Currently the only printed page numbers show up in the Department ID
print totals. The actual print job logs do not hold the actual
number of pages printed
4. I need help with the IR5000 scanning
feature.
Please go to the IR
Network Scanner page for this information.
5. Network Print jobs print with pauses
between pages. Is there a way I can fix this?
Yes. The IR5000 has a feature called Print after completing RIP
When this feature is turned on, the IR5000 waits until the entire print
job is ripped before the first page is printed
This way, the entire job is printed at once rather with pauses between
pages.
Here is how do set it up
Additional Functions
Printer Settings
Settings
Down twice
Print After Completing Rip