1) How large is the hard drive for the iR-105?
    - The hard drive capacity is 10G.
2) What is the capacity of the DADF-J1 document feeder?
    - The capacity of the feeder in 100 sheets, any size.
3) What other controller can be set-up to the iR-105 machine?
    - The imagePASS M1/M2 can be used on the iR-105
4) What version of Service Support Tool can be used to upgrade the iR-105?
    - Version 1.32 or higher must be used to upgrade the system software of the machine. 
    - The lastest Version Of System Software is Ver. 1.63
5) What printer kit is used to upgrade the iR-105 from a copier to a network printer?
    - Network Multi PDL Print Kit-B2
6) What is the power requirements for the iR-105?
    - Dedicated line, NEMA 6-15R Receptacle, which equals to 208V, 60 Hz, 15A.
7) 0209 Jam Code On Side Paper Deck-N1  
    - Jamming  1 in even 20 sheets of paper.
    - Cl 102  wiring was found to be broken
    - Replace Brake Clutch, FH6-5043-000, also ensure that enough play is given to the clutch wiring harness so this issue will not reoccur.
8) 010B Jam Code on a iR-105
    - Broken 52T Gear found on the Upper Fuser Roller causing 010B jam codes.
    - Repalce gear FS7-0007-000, Located on Page Number 810-1, item #80
9) 1129 Jam Code On Finisher K3N
    - This code indicates a Stationary jam at Lower Paper Senser S3.
    - Found that a shaft and a bearing worn out .
    - Repalce Shaft , FB5-9090-000and Bearings, XG9-0403-000.
    - Also please update Parts Catalog, On page Q30-3 of the Saddle/Finisher K3/K4.
    - Shaft located to the left of Item #79, Has No Part Number. Part Number for shaft is FB5-9090-000.
10) E805 Error Codes.
    - Check the operation of the FM2 fan, check wiring from the fan to connector J503 on the DC Controller and  make sure the connector is plugged in securely.
    - Replace the Pretransfer Corona Asselmbly, this assembly may short out and cause the E805 error code to appear.

Home     Back

If you find an error or wish to make a comment, please  let me know.